Professors

Professors of the Faculty

Majzoobi Gholamhossein

Majzoobi Gholamhossein (FA Page)

Professor

Email:

Website:

Articles

Gholam Hossein Majzoobi,alireza hossein khani,Saeed lahmi,Mohammad pipelzadeh,stephan hardy ,Determination of the constants of material models at high strain rates and elevated temperatures using shot impact test ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2013 ,pp. 342-351 ,
Gholam Hossein Majzoobi,M Agh Mohammad Dabbagh,P asgari,Mohammad pipelzadeh,SJ hardy ,Improvement of performance of bolt-nut connections, part I: Simulations ,journal of Mechanical Engineering Science , ,2014 ,pp. 1 ,
Gholam Hossein Majzoobi,M Agh Mohammad Dabbagh,P asgari,Mohammad pipelzadeh,SJ hardy ,Improvement of performance of bolt-nut connections, Part II: Experimental investigation ,journal of Mechanical Engineering Science , ,2014 ,pp. 1-12 ,
َA Atrian,Gholam Hossein Majzoobi,m.h Enayati,h Bakhtiari ,Mechanical and microstructural characterization of Al7075/SiC nanocomposites fabricated by dynamic compaction ,International Journal of Minerals Metallurgy and Materials , ,2014 ,pp. 295 ,
Gholam Hossein Majzoobi,farzad fariba ,A New Technique based on Strain Energy for Correction of Stress-strain Curve ,International Journal of Engineering , ,2014 ,pp. 1287-1296 ,
Gholam Hossein Majzoobi,k MINAII ,Fretting Fatigue Life Estimation of Al 7075-T6 Using Plain Fatigue Test ,TRIBOLOGY TRANSACTIONS , ,2015 ,pp. 613-621 ,
N bonora,Gholam Hossein Majzoobi, ,Numerical implementation of a new coupled cyclic plasticity and continum damage model ,COMPUTATIONAL MATERIALS SCIENCE , ,2014 ,pp. 538-547 ,
Gholam Hossein Majzoobi, ,A New Investigation on the Effect of Re-shot Peening on Fretting Fatigue Behavior of A17075-T6 ,TRIBOLOGY TRANSACTIONS , ,2013 ,pp. 943-952 ,
Gholam Hossein Majzoobi, ,Determination of the Constants of Material Models Using Inverse Taylor Test ,EXPERIMENTAL TECHNIQUES , ,2014 ,pp. 1747-1567 ,
Gholam Hossein Majzoobi,َA Atrian,Mohammad pipelzadeh ,Effect of densification rate on consolidation and properties of Al7075–B4C composite powder ,POWDER METALLURGY AND METAL CERAMICS , ,2015 ,pp. 1-11 ,
Gholam Hossein Majzoobi,َA Atrian,mohammad hossein enayati ,Tribological properties of Al7075-SiC nanocomposite prepared by hot dynamic compaction ,COMPOSITE INTERFACES , ,2015 ,pp. 1-17 ,
Faramarz Fereshteh-Saniee, ,Saeed lahmi,Gholam Hossein Majzoobi ,An Experimental Investigation on the Strain Rate Sensitivity of a Severely Deformed Aluminum Alloy ,EXPERIMENTAL MECHANICS , ,2015 ,pp. 111 ,
Gholam Hossein Majzoobi, ,Mohammad pipelzadeh,stephan hardy ,A new approach for the correction of stress–strain curves after necking in metals ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2014 ,pp. 1-13 ,
jamshid nemati,Gholam Hossein Majzoobi,S Sulaiman,B.T.H.T Baharudin,M.A Azmah Hanim ,Effect of equal channel angular extrusion on Al−6063 bending fatigue characteristics ,International Journal of Minerals Metallurgy and Materials , ,2015 ,pp. 4 ,
Gholam Hossein Majzoobi, ,stephan hardy,Mohammad pipelzadeh,Saeed lahmi ,A constitutive model for hardness considering the effects of strain, strain rate and temperature ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2015 ,pp. 284-298 ,
Gholam Hossein Majzoobi,َAlexsandre Bonora,ِDomenico Gentile, ,Experimental modeling of strain-dependent cyclic plasticity for prediction of hysteresis curve ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2015 ,pp. 314-324 ,
,Gholam Hossein Majzoobi,mohammad hossein enayati,َA Atrian ,A comparative study on hot dynamic compaction and quasi-static hot pressing of Al7075/SiCnp nanocomposite ,ADVANCED POWDER TECHNOLOGY , ,2015 ,pp. 73-82 ,
Gholam Hossein Majzoobi,Amir Hossein Mahmoudi,S. Moradi ,Ductile to brittle failure transition of HSLA-100 Steel at high strain rates and subzero temperatures ,ENGINEERING FRACTURE MECHANICS , ,2016 ,pp. 179-193 ,
Gholam Hossein Majzoobi, ,َA Atrian,stephan hardy,Mohammad pipelzadeh ,Warm dynamic compaction of Al6061/SiC nanocomposite powders ,J Materials: Design and Applications , ,2014 ,pp. 1-13 ,
,Gholam Hossein Majzoobi,Reza Bagheri ,Determination of the extended Drucker–Prager parameters using the surrogate-based optimization method for polypropylene nanocomposites ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2016 ,pp. 220-232 ,
Sayyed Hassan Nourbakhsh Shourabi,Seyyed Ali Gallehdari,Reza Masoudi Nejad,َA Atrian,Gholam Hossein Majzoobi ,Evaluation of tensile strength of Al7075-SiC nanocomposite compacted by gas gun using spherical indentation test and neural networks ,ADVANCED POWDER TECHNOLOGY , ,2016 ,pp. 1821-1827 ,
Gholam Hossein Majzoobi,jamshid nemati,Mohammad Kazem Pipelzadeh,S Sulaiman ,Characterization of mechanical properties of Al-6063 deformed by ECAE ,INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , ,2016 ,pp. 663–672 ,
Gholam Hossein Majzoobi, ,Determination of the constants of cap model for compaction of three metal powders ,ADVANCED POWDER TECHNOLOGY , ,2015 ,pp. 928-934 ,
Gholam Hossein Majzoobi, ,K Farhadi ,The effect of aluminum and titanium sequence on ballistic limit of bi-metal 2/1 FMLs ,THIN-WALLED STRUCTURES , ,2018 ,pp. 1-7 ,
Gholam Hossein Majzoobi, ,َAlexsandre Bonora,Gianluca Lattinni,Andrew Ruggiero, ,Damage characterization of aluminum 2024 thin sheet for different stress triaxialities ,Archives of Civil and Mechanical Engineering , ,2018 ,pp. 702-712 ,
,Gholam Hossein Majzoobi,َAlexsandre Bonora,Gianluca Lattinni,Andrew Ruggiero, ,A study on fiber metal laminates by using a new damage model for composite layer ,INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , ,2017 ,pp. 75-80 ,
,Gholam Hossein Majzoobi ,An investigation into the effect of elevated temperatures on fretting fatigue response under cyclic normal contact loading ,THEORETICAL AND APPLIED FRACTURE MECHANICS , ,2018 ,pp. 144-154 ,
Gholam Hossein Majzoobi, ,َAlexsandre Bonora, ,Gianluca Lattinni,Andrew Ruggiero ,A new constitutive bulk material model to predict the uniaxial tensile nonlinear behavior of fiber metal laminates ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2018 ,pp. 26-35 ,
,Gholam Hossein Majzoobi,Reza Bagheri ,Experimental and analytical investigations into the effects of inorganic filler on the polypropylene nanocomposite microhardness ,JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , ,2017 ,pp. 1484-1502 ,
Gholam Hossein Majzoobi, ,Reza Bagheri ,Deriving parameters of pressure-dependent yield surface for polymeric composites using kriging-based optimization method , , ,2016 ,pp. 280-290 ,
Gholam Hossein Majzoobi,S. Moradi ,The Ballistic Behavior of High Strength, Low Alloy-100 Steel at Sub-zero Temperatures ,International Journal of Engineering , ,2016 ,pp. 1747-1756 ,
,Gholam Hossein Majzoobi, ,Experimental and numerical studies on the effect of deep rolling on bending fretting fatigue resistance of Al7075 ,INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , ,2016 ,pp. 2137–2148 ,
Gholam Hossein Majzoobi, ,Effect of Contact Pressure On Fretting Fatigue Behavior under Cyclic Contact Loading ,SURFACE REVIEW AND LETTERS , ,2017 ,pp. 1-17 ,
Gholam Hossein Majzoobi, ,On the Effect of Contact Geometry on Fretting Fatigue Life Under Cyclic Contact Loading ,TRIBOLOGY LETTERS , ,2017 ,pp. 0-0 ,
Gholam Hossein Majzoobi, ,On the effect of shot-peening on fretting fatigue of Al7075-T6 under cyclic normal contact loading ,SURFACE & COATINGS TECHNOLOGY , ,2017 ,pp. 292-303 ,
Foad Rahimidehgolan,Gholam Hossein Majzoobi,Farhad Alinejad,Jalal Fathi Sola ,Determination of the constants of GTN damage model using experiment, polynomial regression and kriging methods ,Applied Sciences-Basel , ,2017 ,pp. 0-0 ,
Ehsan Khademi,Gholam Hossein Majzoobi,Nicola Bonora ,A strain range dependent cyclic plasticity model ,International Journal of Engineering , ,2017 ,pp. 321-329 ,
,Gholam Hossein Majzoobi,Mohammad Mehdi Barjesteh ,Developing a new experimental set up to study fretting fatigue behavior under cyclic contact loading ,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , ,2017 ,pp. 1-14 ,
Gholam Hossein Majzoobi, ,Estimation of axial fretting fatigue life at elevated temperatures using critical distance theory ,SURFACE REVIEW AND LETTERS , ,2018 ,pp. 1850067(10 pages) ,
S Sulaiman,jamshid nemati,Gholam Hossein Majzoobi,M. AlJermi ,Experimental and numerical study of high strain rate property of pure copper processed by ECAE method ,Advances in Materials and Processing Technologies , ,2019 ,pp. 386-393 ,
,Gholam Hossein Majzoobi,َA Atrian ,Simultaneous effects of strain rate and temperature on mechanical response of fabricated Mg–SiC nanocomposite ,JOURNAL OF COMPOSITE MATERIALS , ,2020 ,pp. 659-668 ,
Gholam Hossein Majzoobi, ,S. Lahmi ,Determination of length to diameter ratio of the bars in torsional Split Hopkinson bar ,MEASUREMENT , ,2019 ,pp. 144-154 ,
,Gholam Hossein Majzoobi ,Effect of out-of-phase loading on fretting fatigue response of Al7075-T6 under cyclic normal loading using a new testing apparatus ,ENGINEERING FRACTURE MECHANICS , ,2018 ,pp. 93-111 ,
َA Atrian,Gholam Hossein Majzoobi,Bernd Markert,Seyed Hassan Nourbakhsh ,A novel approach to calibrate the Druckerâ€“Prager Cap model for Al7075 powder ,ARCHIVE OF APPLIED MECHANICS , ,2018 ,pp. 1859-1876 ,
,Gholam Hossein Majzoobi,َA Atrian ,A novel approach for dynamic compaction of Mgâ€“SiC nanocomposite powder using a modified Split Hopkinson Pressure Bar ,POWDER METALLURGY , ,2018 ,pp. 164-177 ,
k MINAII,Gholamhossein Farrahi,Morad Karimpour,Hamid Bahai,Gholam Hossein Majzoobi ,Investigation of microstructure effect on fretting fatigue crack initiation using crystal plasticity ,FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , ,2019 ,pp. 640-650 ,
Gholam Hossein Majzoobi, , ,Performance of a Two-stages Gas Gun: Experimental, Analytical and Numerical Analysis ,International Journal of Engineering , ,2019 ,pp. Pages 759-768 ,
Gholam Hossein Majzoobi, , ,A new cooperative model for the prediction of compressive yield stress of polycarbonate nanocomposites considering strain rate, temperature, and agglomeration ,JOURNAL OF COMPOSITE MATERIALS , ,2019 ,pp. 3567-3575 ,
,Gholam Hossein Majzoobi, ,Mechanical characterization of polycarbonate reinforced with nanoclay and graphene oxide ,POLYMER COMPOSITES , ,2019 ,pp. 3947-3959 ,
,Gholam Hossein Majzoobi,Ehsan Khademi, ,Development of a new technique for measuring damage accumulation at high strain rates ,ENGINEERING FRACTURE MECHANICS , ,2019 ,pp. 162-172 ,
Gholam Hossein Majzoobi, ,seyed alireza Sabet ,Role of graphene oxide and sonication time on mechanical properties of epoxy nanocomposites at high strain rate ,Materials Research Express , ,2019 ,pp. 065063 ,
,Gholam Hossein Majzoobi ,The effect of compaction loading rate on hardness and wear resistance of Mg–B4C nanocomposite ,Materials Research Express , ,2019 ,pp. (1-12)125081 ,
,Gholam Hossein Majzoobi ,The effect of particle size on microstructure, relative density and indentation load of Mg-B 4 C composites fabricated at different loading rates ,JOURNAL OF COMPOSITE MATERIALS , ,2020 ,pp. page(s): 2297-2311 ,
,Gholam Hossein Majzoobi,Nicola Bonora,Gianluca Iannitti,Andrew Ruggiero,Ehsan Khademi ,A new overall nonlinear damage model for fiber metal laminates based on continuum damage mechanics ,ENGINEERING FRACTURE MECHANICS , ,2019 ,pp. 21-33 ,
Gholam Hossein Majzoobi, ,seyed alireza Sabet ,Mechanical characterization of graphene oxide reinforced epoxy at different strain rates ,POLYMER ENGINEERING AND SCIENCE , ,2019 ,pp. Pages 1636-1647 ,
,Gholam Hossein Majzoobi,seyed alireza Sabet ,Role of sonication time on mechanical properties of graphene oxide/epoxy nanocomposites under quasi-static loading conditions ,IRANIAN POLYMER JOURNAL , ,2019 ,pp. 895-908 ,
Gholam Hossein Majzoobi, ,Numerical and experimental study of ballistic response of kevlar fabric and kevlar/epoxy composite ,International Journal of Engineering , ,2017 ,pp. 791-799 ,
,Gholam Hossein Majzoobi,Ali Sadooghi, ,Mechanical and physical characterization of Mg-TiO2 and Mg-ZrO2 nanocomposites produced by hot-pressing ,MATERIALS CHEMISTRY AND PHYSICS , ,2020 ,pp. 122844-... ,
Gholam Hossein Majzoobi, ,Mechanical characterization of Mg-B4C nanocomposite fabricated at different strain rates ,International Journal of Minerals Metallurgy and Materials , ,2020 ,pp. 252-263 ,
,Gholam Hossein Majzoobi ,Determination of stress–strain curves of materials at high strain rates using dynamic indentation technique ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2021 ,pp. 327-356 ,
Gholam Hossein Majzoobi, ,َA Atrian ,Temperature effect on mechanical and tribological characterization of Mg-SiC nanocomposite fabricated by high rate compaction ,Materials Research Express , ,2018 ,pp. 015046 ,
Gholam Hossein Majzoobi, , ,Mohsen K. Keshavarz ,Effect of projectile nose on high‐velocity impact behavior of fiber metal laminates ,POLYMER COMPOSITES , ,2022 ,pp. 1177-1185 ,
Gholam Hossein Majzoobi, ,َA Atrian ,An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction ,Journal of Stress Analysis , ,2018 ,pp. 35-45 ,
,Gholam Hossein Majzoobi,Joseba Mendiguren ,A review of the effects of cyclic contact loading on fretting fatigue behavior ,Advances in Mechanical Engineering , ,2020 ,pp. 168781402095701-1687 ,
,Gholam Hossein Majzoobi,Hossein Ahmadikia ,A comparative and experimental study on performances of Natural gas-Air Combustion, Helium, and Air as Propellants in a Gas Gun ,COMBUSTION SCIENCE AND TECHNOLOGY , ,2022 ,pp. 682-699 ,
,Gholam Hossein Majzoobi ,A study on damage evolution in Cu-TiO2 composite fabricated at different temperatures and strain rates ,Materials Research Express , ,2021 ,pp. 1-25 ,
Gholam Hossein Majzoobi, , ,A study on damage evolution in Cu–TiO2 composite fabricated using powder metallurgy followed by hot extrusion ,MATERIALS CHEMISTRY AND PHYSICS , ,2022 ,pp. 126140 ,
Gholam Hossein Majzoobi, , ,Microstructural examination and mechanical characterization of Ti/HA and Ti/SiO2 functionally graded materials fabricated at different loading rates ,Journal of the Mechanical Behavior of Biomedical Materials , ,2022 ,pp. 105497 ,
,Gholam Hossein Majzoobi, ,Ali Sadooghi ,On the effect of compaction velocity, size, and content of reinforcing particles on corrosion resistance of Mg–B4C composites ,MATERIALS CHEMISTRY AND PHYSICS , ,2021 ,pp. 124946 ,
Gholam Hossein Majzoobi, ,Incorporation of the effect of strain rate in Mie-Gruneisen equation of state for polyethylene ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2022 ,pp. 38-46 ,
,Gholam Hossein Majzoobi ,An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model ,Journal of Stress Analysis , ,2021 ,pp. 127-138 ,
,Gholam Hossein Majzoobi, ,Ali Sadooghi ,Thermal properties of Mg-B4C micro and nanocomposites fabricated by static and dynamic compaction methods ,TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , ,2022 ,pp. 2139–2148 ,
,Gholam Hossein Majzoobi,Sabrina Vantadori,ِAndrea Zanichelli,Davide Leonetti,Geovanni Pio Pucilo ,Influence of normal load frequency on fretting fatigue behaviour by a critical plane-based approach ,INTERNATIONAL JOURNAL OF FATIGUE , ,2022 ,pp. 106724 ,
Gholam Hossein Majzoobi, , , ,Sajeewa S. N. Maharachchikumbura ,Tribological behaviour of Ti/HA and Ti/SiO2 functionally graded materials fabricated at different strain rates ,Biotribology , ,2023 ,pp. 100233 ,
,Gholam Hossein Majzoobi, ,The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates ,Journal of Stress Analysis , ,2020 ,pp. 19-28 ,
,Gholam Hossein Majzoobi, ,ghasem ebrahimi ,Comprehensive study on quasi-static and dynamic mechanical properties and wear behavior of MgB4C composite compacted at several loading rates through powder metallurgy ,TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , ,2021 ,pp. 1-11 ,
,Gholam Hossein Majzoobi ,A Study of the Functionally Graded (Magnesium/Titanium Dioxide) Material's Mechanical and Tribological Characteristics Fabricated at Various Compaction Loading Rates ,TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , ,2023 ,pp. 3175–3185 ,
,Gholam Hossein Majzoobi,Hassan Elmkhah ,On the effect of Cr/CrN nanolayered coating deposited by Arc-PVD method on axial fretting fatigue behavior of Al7075-T6 alloy ,SURFACE & COATINGS TECHNOLOGY , ,2023 ,pp. 129176 ,
,Gholam Hossein Majzoobi ,Determination of the parameters of material models using dynamic indentation test and artificial neural network ,JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , ,2023 ,pp. 501-514 ,
,Gholam Hossein Majzoobi,d r ,Characterization of a functionally graded material produced using a new designed blender ,PHYSICA SCRIPTA , ,2024 ,pp. 025994 ,
Gholam Hossein Majzoobi, ,Hassan Elmkhah ,An Investigation Into the Synergistic Effect of CAPVD Cr/CrN Nanolayered Coating Deposition and Hard-Anodizing Methods on Fretting Fatigue Life of 7075-T6 Aluminum Alloy ,TRIBOLOGY TRANSACTIONS , ,2023 ,pp. 683–696 ,

Conferences

Gholam Hossein Majzoobi, ,َA Atrian ,Evaluation of mechanical properties of Al7075/SiC Nanocomposite Fabricated by Hot Uniaxial Pressing ,5th international conference on nanostructures (ICNS5) ,2014/03/06 ,کیش ,
Gholam Hossein Majzoobi, ,Saeed lahmi ,DETERMINATION OF LENGTH TO DIAMETER RATIO IN TORSIONAL SPLIT HOPKINSON BAR ,The Bi-annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014) ,2014/02/18 ,Iran ,
Gholam Hossein Majzoobi,َA Atrian, ,The Effect of Pre-compaction on Dynamic Compaction Process of Al/SiC Nanocomposite Powder ,The Bi-annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014) ,2014/02/18 ,Iran ,
Gholam Hossein Majzoobi, ,Determination of the constants of Zerilli-Armstrong model using inverse Taylor test ,The Bi-annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014) ,2014/02/18 ,Iran ,
Gholam Hossein Majzoobi,alireza hossein khani,Saeed lahmi ,A new technique for determination of the constants of Zerilli-Armstrong material model at high strain rates and elevated temperatures ,The Bi-annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014) ,2014/02/18 ,Iran ,
,Gholam Hossein Majzoobi ,A Study on the Optimum Locations of Mounting Strain Gauges on Torsional Split Hopkinson Bar ,AMPT 2014 Advances in materials and processing technology ,2014/11/11 ,Dubai ,
Gholam Hossein Majzoobi,farhan khodaee ,DETERMINATION OF TENSILE AND SHEAR STRENGTHS USING A NEW TEST SPECIMEN ,AMPT 2014 Advances in materials and processing technology ,2014/11/11 ,Dubai ,

Project Name	Degree	download-thesis	def-date

بررسی تجربی و عددی رفتارخمشی چرخه ای ورق های فلزی الیافی تحت بارگذاری خمش سه نقطه ای چرخه ای	M.S	Download	1401/12/20
تعیین خواص مکانیکی مواد به روش نفوذ دینامیکی برای نرخ کرنش و دماهای بالا	Ph.D	Download	1401/12/03
تعیین خواص مکانیکی نانوکامپوزیت های پلی پروپیلن/خاک رس و پلی پروپیلن/کربنات کلسیم تحت بارگذاری ضربه ای و سیکلی	Ph.D	Download	1395/04/27
تعیین خواص مکانیکی مواد به روش نفوذ دینامیکی برای نرخ کرنش و دماهای بالا	Ph.D	Download	1401/12/03
بررسی اثرات نرخ کرنش در آسیب فلزات با استفاده از مکانیک آسیب و پیش آسیب	Ph.D	Download	1400/11/27
بررسی تاثیر پوشش نانوساختار لایه ای کروم و نیترید کروم اعمال شده به روش رسوب گذاری فیزیکی از فاز بخار به علاوه آنودایز بر خستگی سایشی محوری آلیاژ آلومینیوم 7075	M.S	Download	1400/07/20
بررسی تجربی و عددی رفتارخمشی چرخه ای ورق های فلزی الیافی تحت بارگذاری خمش سه نقطه ای چرخه ای	M.S	Download	1401/12/20
تعیین خواص مکانیکی و تریبولوژیکی مواد هدفمند (FGM) Ti-SiO2و Ti-HA ساخته شده با روش متالورژی پودر جهت استفاده در ایمپلنت دندان	M.S	Download	1400/08/01
تخمین عمر خستگی سایشی محوری در دمای بالا	M.S		1394/11/25
بررسی مقایسه ای بین روش های آزمایش مواد در نرخ کرنش بالا	M.S	Download	1395/03/03
یک مطالعه تجربی بر روی محل جوانه زنی ترک و انتشار آن و بهبود عمر در خستگی سایشی	M.S	Download	1395/04/26
تحلیل تجربی و عددی ارتعاشات ورق های مستطیل شکل کامپوزیتی الیاف فلز	M.S	Download	1398/04/09
بررسی خواص مکانیکی نانو کامپوزیت پایه منیزیم ساخته شده به روش فشرده سازی پودر	Ph.D	Download	1397/07/04
مطالعه خواص مکانیکی ورق های سمبه زنی شده در دما و نرخ های کرنش متفاوت	M.S	Download	1397/11/27
بررسی تجربی و عددی معادل حالات دینامیکی در مواد پلیمری	M.S	Download	1398/06/31
بررسی انفجار مخلوط هوا-متان به عنوان نیروی پیشران در تفنگ های گازی و تأثیرات آن بر روی سرعت پیستون و پرتابه	M.S	Download	1397/11/29
بررسی اثر غلتک‎زنی عمیق بر عمر خستگی سایشی در خمش دورانی	M.S		1393/06/16
ارزیابی قابلیت دستگاه آزمایش گوه پرتابی برای ضبط منحنی تنش- کرنش	M.S	Download	1397/07/08
تخمین عمر خستگی سایشی تحت بار تماسی نوسانی با استفاده از تئوری فاصله بحرانی	Ph.D	Download	1396/07/04
ساخت نانوکامپوزیت پایه آلومینیوم سری 7000 به روش فشرده سازی پودر و مشخصه یابی خواص مکانیکی آن	Ph.D		1393/07/06
ارائه روش های نوین در اصلاح منحنی های تنش-کرنش	Ph.D		1393/10/21
بررسی اثر پارامترهای مختلف بر عملکرد یک تفنگ گازی دومرحله ای	M.S	Download	1396/03/30
بررسی خواص مکانیکی و خرابی در ورق های فلزی الیافی با استفاده از شبیه سازی و آزمایش	Ph.D	Download	1396/10/26
بررسی نرخ کرنش و دما بر سختی مواد	M.S		1393/02/29
مطالعه عددی و تجربی رفتار دینامیکی کامپوزیت پلیمری	M.S	Download	1394/12/25
بررسی مکـانیکی و متالوژیکی رفتـار شکست و بالستیک ورق فــولادی HSLA-100 در دماهای محیط تا زیر صفر با نرخهای کرنش متفاوت	M.S	Download	1393/11/29
مطالعه تجربی خواص محافظ های لایه ای (FML) تحت ضربات سرعت بالا با استفاده از تغییر چیدمان لایه ها	M.S		1394/03/25
اثر تنش پسماند بر نمودار تنش-کرنش بدست آمده ازمیله ی هاپکینسون	M.S	Download	1394/06/20
اثر تنشهای پسماند بر نمودار بدست آمده از میله هاپکینسون	M.S	Download	1394/06/16
تاثیر دما بر خمش صفحه ای پروفیل های نبشی، ناودانی و تسمه از جنس آلومینیوم، مس یا آهن	M.S	Download	1399/02/31
مطالعه رفتار مکانیکی و بالستیک نانوکامپوزیتهای پلی کربنات- نانو رس/ گرافن	Ph.D	Download	1398/06/31

Name

Showing 8 results.

First Previous Next Last

Faculty

Staff

Students

Others

Professors

Professors of the Faculty

Majzoobi Gholamhossein

Majzoobi Gholamhossein (FA Page)

Articles

Conferences

Faculty

Staff

Students

Others

About the Faculty

Structure of the Faculty

Bachelor’s Degree

Postgraduate Studies

Research Affairs

Workshops and Laboratories

Journals

Contact Industry Office

Related Centers

Regulations and Processes

Professors

Departments

Majzoobi Gholamhossein

Majzoobi Gholamhossein (FA Page)

Articles

Conferences