Evaluation of Thermal-Mechanical Behavior of Massive Self Compacting Concrete Containing Alkali-Activated Slag
Evaluation of Thermal-Mechanical Behavior of Massive Self Compacting Concrete Containing Alkali-Activated Slag
Evaluation of Thermal-Mechanical Behavior of Massive Self Compacting Concrete Containing Alkali-Activated Slag
نوع: Type: thesis
مقطع: Segment: PHD
عنوان: Title: Evaluation of Thermal-Mechanical Behavior of Massive Self Compacting Concrete Containing Alkali-Activated Slag
ارائه دهنده: Provider: shahriar abdolahzade
اساتید راهنما: Supervisors: Mahmoud Nili (PhD)
اساتید مشاور: Advisory Professors:
اساتید ممتحن یا داور: Examining professors or referees: Rahmad Madandoust (PhD)-Malek Ranjbar (PhD)-Mohamad Shooshtari (PhD)
زمان و تاریخ ارائه: Time and date of presentation: 13-11-2023
مکان ارائه: Place of presentation: Engineering Faculty
چکیده: Abstract: Concrete as the most widely used material in the world, plays a key role in construction projects. Thermal stress and damages caused by heat generation at an early age tend to be important challenges in constructing massive elements. On the other hand, one of the goals of sustainable development is decreasing CO2 production and preserving the environment which can be achieved by using by-product materials in order to reduce or even eliminate the cement from concrete. Therefore, it is necessary to use new concretes such as self-compacted concretes and new ways and materials like alkali- activated slag to improve mechanical properties and reduce the risk of cracking in massive elements. In this study, the use of alkali-activated slag in self-compacted concretes in massive elements has been taken into account to reduce the risk of cracking and improve mechanical properties. Given the variety of influential factors on mechanical and thermal properties of massive concretes and in order to specify the most influential parameter, the Taguchi method (L9 orthogonal array) was used to determine the concrete mixes. Moreover, four curing methods were considered to simulate the different conditions in massive concretes. Thus, concretes with binder content of 500, 600, and 700, water to binder ratio of 0.45, 0.465, and 0.48, sodium ion of 5,6, and 7% of binder content and coarse to fine aggregates ratio (C-F) of 35-65, 30-70, and 25-75 were taken into account. In the first section of this research, mechanical properties including compressive and tensile strength, modulus of elasticity, water absorption and thermal properties such as semi-adiabatic temperature history and coefficient of thermal conductivity of nine concrete mixes were evaluated. With respect to the experimental results, numerical analysis via Minitab software and simulation by 4C temp & stress software were conducted to assess the risk of cracking. In the second section, numerical relationships were presented in order to estimate the mechanical and thermal properties of alkali-activated self-compacted concretes and they have been verified by four random mix designs. In section three, thermal and mechanical properties of alkali-activated and cement-based self-compacted concretes were compared in three binder contents. The highest compressive and tensile strength and modulus of elasticity are related to mixes with 700 binder content and an alkaline solution with 7% Na2o. The thermal curing regime contributes to improving the mechanical properties of alkali-activated self-compacted concretes. Increasing the amount of binder content from 500 to 600 and 600 to 700 resulted in a 7.6 and 6.7 % rise in the compressive strength and 7.6 and 3.9% rise in tensile strength. It is possible to estimate the mechanical properties as well as the amount of heat produced as one of the most important thermal factors by regression relationships with high accuracy (R²=0.968). Lower modulus of elasticity in alkali activated concretes can be beneficial in reducing the risk of cracking in massive concretes because of their ductility. Generally, peak temperature and the amount of heat produced by cement-based concretes are 14% and 56% higher than that of alkali-activated ones, respectively. As a result, in software simulation, a higher risk of cracking in cement-based concretes compared to alkali- activated ones shows the better thermal and mechanical performance of alkali-activated mass concretes.
به اطلاع متقاضیان دکترای سال تحصیلی 1404-1403 رشته های مهندسی (مکانیک - کامپیوتر - برق - مواد - عمران - صنایع) دانشگاه بوعلی سینا می رساند، فهرست اساتید پذیرنده دانشکده مهندسی...
به اطلاع می رساند یک شرکت دانش بنیان در اصفهان نیازمند خدمات تحقیقاتی دانش آموختگان رشته های مواد و شیمی بوده و استخدام می کند. علاقمندان جهت کسب اطلاعات بیشتر و هماهنگی با شماره 03133879868 در...
به گزارش بسنا، مراسم افتتاحیه این پروژه با حضور محمدعلی زلفیگل وزیر علوم، تحقیقات و فناوری و دکتر علیرضا قاسمیفرزاد استاندار همدان، معاونان وزارتخانههای علوم و مسئولان استانی و ریاست...
دفتر هدایت استعدادهای درخشان دانشگاه بوعلیسینا فهرست اسامی دانشجویان برگزیده آموزشی پژوهشی پانزدهمین همایش سالانه دفتر هدایت استعدادهای درخشان سال ۱۴۰۲ را منتشر کرد. اسامی دانشجویان...
بهراد توتونچی دبیر انجمن علمی دانشجویی مهندسی عمران دانشگاه بوعلی سینا، در جلسه ای با حضور نمایندگان دانشگاه های سراسر کشور، با کسب اکثریت آرا انتخابات، به عنوان دبیر...
در هشتمین نشست از دوره یازدهم هیأت ممیزه دانشگاه بوعلیسینا، آقای دکتر علیرضا حاتمی دارای مدرک دکتری در رشته مهندسی برق با ر أ ی اعضاء از مرتبه...
بدینوسیله انتخاب آقای دکتر آرش فتاح الحسینی را به عنوان پژوهشگر برگزیده دانشگاه در گروه فنی و مهندسی به ایشان و خانواده علمی دانشکده مهندسی تبریک عرض نموده و از خداوند متعال...
بدینوسیله انتخاب دو تن از دانشجویان دانشکده مهندسی مهندس راضیه چهارمحالی در مقطع دکتری رشته مهندسی مواد شاخه خوردگی و مهندسی سطح و مهندس امین نظری در مقطع...
بدینوسیله انتخاب سه عضو هیات علمی دانشکده مهندسی جناب آقایان دکتر جواد بهنامیان ، دکتر حسن علم خواه و دکتر محسن گودرزی در...
براساس اطلاعات پایگاه شاخصهای اساسی علم (ESI)، حضوردکتر محمد حسن مرادی از گروه مهندسی برق دانشکده مهندسی در زمره پژوهشگران پراستناد یک درصد برتر دنیا استمرار پیدا کرد. ...
بدینوسیله انتخاب اعضا محترم هیات علمی سرکار خانم دکتر سموئی (گروه مهندسی صنایع)، جناب آقایان دکتر بابائی (گروه مهندسی عمران)، دکتر حاتمی (گروه مهندسی برق)، دکتر ختن لو (گروه مهندسی...
بدینوسیله انتخاب چهار عضو هیات علمی دانشکده مهندسی جناب آقای دکتر جواد بهنامیان از گروه مهندسی صنایع به عنوان پژوهشگر اول برگزیده، جناب آقای دکتر حسن علم خواه از گروه...
به گزارش بسنا و به نقل از سازمان سنجش، آزمون مرحله نهایی بیست و هشتمین دوره المپیاد علمی دانشجویی کشور با حضور نفرات برگزیده آزمون کارشناسی ارشد (متمرکز) و آزمون غیرمتمرکز المپیاد در دانشگاههای...
به اطلاع دانشجویان محترم می رساند سایت کامپیوتر کارشناسی دانشکده مهندسی به دلیل انجام ثبت نام دانشجویان کارشناسی ورودی 1402 از شنبه 1402/7/22 به مدت یک هفته تعطیل می باشد.
به گزارش بسنا و به نقل از معاونت علمی فناوری ریاست جمهوری، در هشتمین دوره تجلیل از سرآمدان علمی کشور در سال ۱۴۰۲ که با حضور معاون علمی و فناوری و اقتصاد دانشبنیان رئیسجمهور و وزیر علوم...
به اطلاع دانشجویان ورودی جدید تحصیلات تکمیلی (ارشد و دکترا) می رساند، یکشنبه 23 مهر ساعت 11 الی 13 در محل آمفی تئاتر دانشکده مهندسی جلسه معارفه با هیات رییسه دانشکده برگزار می شود. ...
بر اساس اطلاعات جدید نمایه استنادی معتبر scopus ۲۰۲۳، با بررسی مقالات مربوط به ۲۰۲۲، 4 عضو هیات علمی و 1 دانش آموخته دانشکده مهندسی و با بررسی کل مقالات مربوط به سال های مختلف، 1 نفر از اعضای هیات...
نظر به مراتب تعهد، تخصص و تجارب ارزشمند جناب آقای دکتر حسن علم خواه و بنا به پیشنهاد رئیس دانشکده مهندسی، به موجب ابلاغی ایشان با حفظ سمت آموزشی به مدت 2 سال به عنوان...
در حکمی از طرف ریاست دانشگاه آقای دکتر امیرسامان خیرخواه به عنوان مدیر گروه رشته مهندسی صنایع منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب...
در حکمی از طرف ریاست دانشگاه آقای دکتر صالح رازینی به عنوان مدیر گروه رشته مهندسی برق منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب ارزنده...