Investigation of the Behavior of Reinforced Concrete Deep Beams Strengthened with CFRP and GFRP Bars
Investigation of the Behavior of Reinforced Concrete Deep Beams Strengthened with CFRP and GFRP Bars
Investigation of the Behavior of Reinforced Concrete Deep Beams Strengthened with CFRP and GFRP Bars
نوع: Type: Thesis
مقطع: Segment: Msc
عنوان: Title: Investigation of the Behavior of Reinforced Concrete Deep Beams Strengthened with CFRP and GFRP Bars
ارائه دهنده: Provider: Kayvan Jady
اساتید راهنما: Supervisors: Mostafa Moghadasi (Ph.D)
اساتید مشاور: Advisory Professors: Mahmoud Nili (Ph.D) , Fereydun Rezaei (Ph.D)
اساتید ممتحن یا داور: Examining professors or referees:
زمان و تاریخ ارائه: Time and date of presentation: November, 11, 2020 - 10
مکان ارائه: Place of presentation:
چکیده: Abstract: In recent years, with the discussion of improvement and strengthening of reinforced concrete elements by FRP fibers, a new season of studies has been formed in this field. Since that beams are part of the structural system, strengthening them can prevent the collapse and damage of reinforced concrete structures. Considering the dimension ratio of deep beams and high shear deformation, the main weakness of deep beams can be considered as low shear capacity compared to flexural capacity and consequent shear failure. To strengthen these concrete elements, several methods have been used, one of the most effective of them is the reinforcement of deep beams with the means of composite bars. Composite bars are used in various industries such as military, medical and construction due to their properties such as light weight, high strength, higher strength, tensile behavior and properties, better compression and adhesion than other fibers. Although many laboratory studies have been performed to better understand the behavior of reinforced deep beams, even the most comprehensive ones cannot fully cover the interaction of variables participating in the performance of these structures. In addition, real-scale laboratory studies are costly and time consuming, which limits the number of parameters to be evaluated, so numerical simulation is a powerful tool for laboratory studies, although the use of finite element methods requires validation of tasks. There is a laboratory. Despite what has been said, there is a lack of research in which the behavior of reinforced deep beams with CFRP and GFRP bars and steel bars has been investigated comparatively. In order to investigate the performance of this method, in this study, ABAQUS FEM software has been used, 18 deep beam element with simple support were modeled under two concentrated loads; In all loading patterns, the applied load range was applied uniformly so that the applied loads started from zero at the beginning of the analysis -- and increased linearly (Ramp) to the maximum value. The effect of CFRP, GFRP and steel bars was investigated using the nonlinear finite element method. The models were analyzed based on the plastic damaged-concrete model that can be used in static and dynamic calculations. 6 series of samples, each of them was modeled by three types of steel bars, CFRP and GFRP, were analyzed. For each sample, the force and location of the first crack, fracture mode and overload-displacement load diagram were determined to compare parameters such as maximum load capacity, absorbed energy, ductility and stiffness. Investigating the models found that the fracture modes in the elements are almost similar to each other, so that in deep beams, shear cracks were created at a 45-degree angle in the tensile region. Comparing the results of the analysis of the mentioned models regarding the carrying capacity, it was observed that among the used models, the S2 model experienced the largest increase in carrying capacity compared to the G2 model with a 59% increase. Regarding the absorbed energy in the S4 model, with the increase of the area under the curve, the absorbed energy increased by 208.44% compared to the G4 model. On the other hand, in examining the ductility of the modeled deep beams, it was observed that the S6 model has faced an increase of 118.89% compared to the G6. Further examination of the models showed that the hardness of deep reinforced concrete beams is approximately equal and in the range of 89 kN/mm. Also, the force required to create the first crack (Pcr) in steel-reinforced samples was higher than other models. In the end, according to the analysis, it was observed that steel bars have higher bearing capacity, absorbed energy and ductility than deep reinforced concrete beams reinforced with CFRP and GFRP bars. Key Words: Behavior of Reinforced Concrete Beam, Deep Beam, Reinforced Concrete Beam Strengthened, CFRP Bars, GFRP Bars
به اطلاع متقاضیان دکترای سال تحصیلی 1404-1403 رشته های مهندسی (مکانیک - کامپیوتر - برق - مواد - عمران - صنایع) دانشگاه بوعلی سینا می رساند، فهرست اساتید پذیرنده دانشکده مهندسی...
به اطلاع می رساند یک شرکت دانش بنیان در اصفهان نیازمند خدمات تحقیقاتی دانش آموختگان رشته های مواد و شیمی بوده و استخدام می کند. علاقمندان جهت کسب اطلاعات بیشتر و هماهنگی با شماره 03133879868 در...
به گزارش بسنا، مراسم افتتاحیه این پروژه با حضور محمدعلی زلفیگل وزیر علوم، تحقیقات و فناوری و دکتر علیرضا قاسمیفرزاد استاندار همدان، معاونان وزارتخانههای علوم و مسئولان استانی و ریاست...
دفتر هدایت استعدادهای درخشان دانشگاه بوعلیسینا فهرست اسامی دانشجویان برگزیده آموزشی پژوهشی پانزدهمین همایش سالانه دفتر هدایت استعدادهای درخشان سال ۱۴۰۲ را منتشر کرد. اسامی دانشجویان...
بهراد توتونچی دبیر انجمن علمی دانشجویی مهندسی عمران دانشگاه بوعلی سینا، در جلسه ای با حضور نمایندگان دانشگاه های سراسر کشور، با کسب اکثریت آرا انتخابات، به عنوان دبیر...
در هشتمین نشست از دوره یازدهم هیأت ممیزه دانشگاه بوعلیسینا، آقای دکتر علیرضا حاتمی دارای مدرک دکتری در رشته مهندسی برق با ر أ ی اعضاء از مرتبه...
بدینوسیله انتخاب آقای دکتر آرش فتاح الحسینی را به عنوان پژوهشگر برگزیده دانشگاه در گروه فنی و مهندسی به ایشان و خانواده علمی دانشکده مهندسی تبریک عرض نموده و از خداوند متعال...
بدینوسیله انتخاب دو تن از دانشجویان دانشکده مهندسی مهندس راضیه چهارمحالی در مقطع دکتری رشته مهندسی مواد شاخه خوردگی و مهندسی سطح و مهندس امین نظری در مقطع...
بدینوسیله انتخاب سه عضو هیات علمی دانشکده مهندسی جناب آقایان دکتر جواد بهنامیان ، دکتر حسن علم خواه و دکتر محسن گودرزی در...
براساس اطلاعات پایگاه شاخصهای اساسی علم (ESI)، حضوردکتر محمد حسن مرادی از گروه مهندسی برق دانشکده مهندسی در زمره پژوهشگران پراستناد یک درصد برتر دنیا استمرار پیدا کرد. ...
بدینوسیله انتخاب اعضا محترم هیات علمی سرکار خانم دکتر سموئی (گروه مهندسی صنایع)، جناب آقایان دکتر بابائی (گروه مهندسی عمران)، دکتر حاتمی (گروه مهندسی برق)، دکتر ختن لو (گروه مهندسی...
بدینوسیله انتخاب چهار عضو هیات علمی دانشکده مهندسی جناب آقای دکتر جواد بهنامیان از گروه مهندسی صنایع به عنوان پژوهشگر اول برگزیده، جناب آقای دکتر حسن علم خواه از گروه...
به گزارش بسنا و به نقل از سازمان سنجش، آزمون مرحله نهایی بیست و هشتمین دوره المپیاد علمی دانشجویی کشور با حضور نفرات برگزیده آزمون کارشناسی ارشد (متمرکز) و آزمون غیرمتمرکز المپیاد در دانشگاههای...
به اطلاع دانشجویان محترم می رساند سایت کامپیوتر کارشناسی دانشکده مهندسی به دلیل انجام ثبت نام دانشجویان کارشناسی ورودی 1402 از شنبه 1402/7/22 به مدت یک هفته تعطیل می باشد.
به گزارش بسنا و به نقل از معاونت علمی فناوری ریاست جمهوری، در هشتمین دوره تجلیل از سرآمدان علمی کشور در سال ۱۴۰۲ که با حضور معاون علمی و فناوری و اقتصاد دانشبنیان رئیسجمهور و وزیر علوم...
به اطلاع دانشجویان ورودی جدید تحصیلات تکمیلی (ارشد و دکترا) می رساند، یکشنبه 23 مهر ساعت 11 الی 13 در محل آمفی تئاتر دانشکده مهندسی جلسه معارفه با هیات رییسه دانشکده برگزار می شود. ...
بر اساس اطلاعات جدید نمایه استنادی معتبر scopus ۲۰۲۳، با بررسی مقالات مربوط به ۲۰۲۲، 4 عضو هیات علمی و 1 دانش آموخته دانشکده مهندسی و با بررسی کل مقالات مربوط به سال های مختلف، 1 نفر از اعضای هیات...
نظر به مراتب تعهد، تخصص و تجارب ارزشمند جناب آقای دکتر حسن علم خواه و بنا به پیشنهاد رئیس دانشکده مهندسی، به موجب ابلاغی ایشان با حفظ سمت آموزشی به مدت 2 سال به عنوان...
در حکمی از طرف ریاست دانشگاه آقای دکتر امیرسامان خیرخواه به عنوان مدیر گروه رشته مهندسی صنایع منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب...
در حکمی از طرف ریاست دانشگاه آقای دکتر صالح رازینی به عنوان مدیر گروه رشته مهندسی برق منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب ارزنده...