بررسی بهبود خواص مکانیکی ورق فلزی آلیاژهای سبک ریزدانهشده به روش فشار کنگرهای مقید
بررسی بهبود خواص مکانیکی ورق فلزی آلیاژهای سبک ریزدانهشده به روش فشار کنگرهای مقید
بررسی بهبود خواص مکانیکی ورق فلزی آلیاژهای سبک ریزدانهشده به روش فشار کنگرهای مقید
نوع: Type: thesis
مقطع: Segment: PH.D
عنوان: Title: بررسی بهبود خواص مکانیکی ورق فلزی آلیاژهای سبک ریزدانهشده به روش فشار کنگرهای مقید
ارائه دهنده: Provider:
اساتید راهنما: Supervisors: Faramarz Fereshteh-Saniee (Ph.D)
اساتید مشاور: Advisory Professors:
اساتید ممتحن یا داور: Examining professors or referees:
زمان و تاریخ ارائه: Time and date of presentation:
مکان ارائه: Place of presentation:
چکیده: Abstract: Severe plastic deformation is one of the metal forming processes to improve mechanical properties. The constrained groove pressing is one of the sheet severe plastic deformation methods, which has received much attention in recent years. In the present study, the elevated-temperature constrained groove pressing was performed up to three cycles on the 2024 aluminum alloy and AZ91D magnesium alloys. Optical microscopy, scanning electron microscopy and X-ray diffraction, were used to study the various sample microstructure, and discuss the average grain size, development, and morphology of the precipitations and the secondary phases, grain's preferred orientation by texture analysis. Mechanical properties of various samples such as ultimate tensile strength, yield strength, elongation, Vickers hardness, anisotropy coefficients, fracture toughness and fatigue crack growth rate were also measured. The results of this study showed that the samples produced during the first cycle of the constrained groove pressing in both alloys had the lowest average grain size compared to the other samples. Based on this grain refinement, the yield strength, ultimate tensile strength and Vickers hardness of the annealed 2024 Al alloy specimen were increased by 45%, 21% and 65%, respectively. This increase was also observed in the AZ91D magnesium alloy, which resulted in the yield strength, ultimate tensile strength, and Vickers hardness of 1-passed sample to be 166.7 MPa, 1661.1 MPa and 86.3 Hv, respectively. One of this research's achievements is reaching to 41.0% elongation for the sample produced during the third cycle of this process, for 2024 Al alloy and 36.1% elongation for the 1-passed sample of AZ91D Mg alloy. This study showed that the 1-passed sample in both alloys, having low planar anisotropy. This makes the samples that were produced by the first cycle of the elevated-temperature constrained groove pressing process, suitable for use in secondary metal forming processes. The highest fracture toughness in the 2024 Al alloy was observed in the 1-passed sample with 25.07 MPa.m0.5 and in the AZ91D Mg alloy belonged to the 1-passed sample with 20.20 MPa.m0.5. The highest rate of fatigue crack growth in the stable region in both alloys was related to the 1-passed sample. In this study, the process of constrained groove pressing was simulated in the Abacus software. By using simulation's results in the neural network and genetic algorithm, optimum die dimensions were obtained to achieve the highest and most uniform induced strain distribution and the lowest force required to perform the process. Key Words: Constrained groove pressing, Al 2024 alloy, Mg AZ91D, Simulation, Microstructure, Mechanical properties.
به اطلاع متقاضیان دکترای سال تحصیلی 1404-1403 رشته های مهندسی (مکانیک - کامپیوتر - برق - مواد - عمران - صنایع) دانشگاه بوعلی سینا می رساند، فهرست اساتید پذیرنده دانشکده مهندسی...
به اطلاع می رساند یک شرکت دانش بنیان در اصفهان نیازمند خدمات تحقیقاتی دانش آموختگان رشته های مواد و شیمی بوده و استخدام می کند. علاقمندان جهت کسب اطلاعات بیشتر و هماهنگی با شماره 03133879868 در...
به گزارش بسنا، مراسم افتتاحیه این پروژه با حضور محمدعلی زلفیگل وزیر علوم، تحقیقات و فناوری و دکتر علیرضا قاسمیفرزاد استاندار همدان، معاونان وزارتخانههای علوم و مسئولان استانی و ریاست...
دفتر هدایت استعدادهای درخشان دانشگاه بوعلیسینا فهرست اسامی دانشجویان برگزیده آموزشی پژوهشی پانزدهمین همایش سالانه دفتر هدایت استعدادهای درخشان سال ۱۴۰۲ را منتشر کرد. اسامی دانشجویان...
بهراد توتونچی دبیر انجمن علمی دانشجویی مهندسی عمران دانشگاه بوعلی سینا، در جلسه ای با حضور نمایندگان دانشگاه های سراسر کشور، با کسب اکثریت آرا انتخابات، به عنوان دبیر...
در هشتمین نشست از دوره یازدهم هیأت ممیزه دانشگاه بوعلیسینا، آقای دکتر علیرضا حاتمی دارای مدرک دکتری در رشته مهندسی برق با ر أ ی اعضاء از مرتبه...
بدینوسیله انتخاب آقای دکتر آرش فتاح الحسینی را به عنوان پژوهشگر برگزیده دانشگاه در گروه فنی و مهندسی به ایشان و خانواده علمی دانشکده مهندسی تبریک عرض نموده و از خداوند متعال...
بدینوسیله انتخاب دو تن از دانشجویان دانشکده مهندسی مهندس راضیه چهارمحالی در مقطع دکتری رشته مهندسی مواد شاخه خوردگی و مهندسی سطح و مهندس امین نظری در مقطع...
بدینوسیله انتخاب سه عضو هیات علمی دانشکده مهندسی جناب آقایان دکتر جواد بهنامیان ، دکتر حسن علم خواه و دکتر محسن گودرزی در...
براساس اطلاعات پایگاه شاخصهای اساسی علم (ESI)، حضوردکتر محمد حسن مرادی از گروه مهندسی برق دانشکده مهندسی در زمره پژوهشگران پراستناد یک درصد برتر دنیا استمرار پیدا کرد. ...
بدینوسیله انتخاب اعضا محترم هیات علمی سرکار خانم دکتر سموئی (گروه مهندسی صنایع)، جناب آقایان دکتر بابائی (گروه مهندسی عمران)، دکتر حاتمی (گروه مهندسی برق)، دکتر ختن لو (گروه مهندسی...
بدینوسیله انتخاب چهار عضو هیات علمی دانشکده مهندسی جناب آقای دکتر جواد بهنامیان از گروه مهندسی صنایع به عنوان پژوهشگر اول برگزیده، جناب آقای دکتر حسن علم خواه از گروه...
به گزارش بسنا و به نقل از سازمان سنجش، آزمون مرحله نهایی بیست و هشتمین دوره المپیاد علمی دانشجویی کشور با حضور نفرات برگزیده آزمون کارشناسی ارشد (متمرکز) و آزمون غیرمتمرکز المپیاد در دانشگاههای...
به اطلاع دانشجویان محترم می رساند سایت کامپیوتر کارشناسی دانشکده مهندسی به دلیل انجام ثبت نام دانشجویان کارشناسی ورودی 1402 از شنبه 1402/7/22 به مدت یک هفته تعطیل می باشد.
به گزارش بسنا و به نقل از معاونت علمی فناوری ریاست جمهوری، در هشتمین دوره تجلیل از سرآمدان علمی کشور در سال ۱۴۰۲ که با حضور معاون علمی و فناوری و اقتصاد دانشبنیان رئیسجمهور و وزیر علوم...
به اطلاع دانشجویان ورودی جدید تحصیلات تکمیلی (ارشد و دکترا) می رساند، یکشنبه 23 مهر ساعت 11 الی 13 در محل آمفی تئاتر دانشکده مهندسی جلسه معارفه با هیات رییسه دانشکده برگزار می شود. ...
بر اساس اطلاعات جدید نمایه استنادی معتبر scopus ۲۰۲۳، با بررسی مقالات مربوط به ۲۰۲۲، 4 عضو هیات علمی و 1 دانش آموخته دانشکده مهندسی و با بررسی کل مقالات مربوط به سال های مختلف، 1 نفر از اعضای هیات...
نظر به مراتب تعهد، تخصص و تجارب ارزشمند جناب آقای دکتر حسن علم خواه و بنا به پیشنهاد رئیس دانشکده مهندسی، به موجب ابلاغی ایشان با حفظ سمت آموزشی به مدت 2 سال به عنوان...
در حکمی از طرف ریاست دانشگاه آقای دکتر امیرسامان خیرخواه به عنوان مدیر گروه رشته مهندسی صنایع منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب...
در حکمی از طرف ریاست دانشگاه آقای دکتر صالح رازینی به عنوان مدیر گروه رشته مهندسی برق منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب ارزنده...