An Investigation on the Effects of Ultrasonic Peening on the Properties of CrN Nanostructured Coating by Cathodic Vapor Deposition Method
An Investigation on the Effects of Ultrasonic Peening on the Properties of CrN Nanostructured Coating by Cathodic Vapor Deposition Method
An Investigation on the Effects of Ultrasonic Peening on the Properties of CrN Nanostructured Coating by Cathodic Vapor Deposition Method
نوع: Type: thesis
مقطع: Segment: masters
عنوان: Title: An Investigation on the Effects of Ultrasonic Peening on the Properties of CrN Nanostructured Coating by Cathodic Vapor Deposition Method
ارائه دهنده: Provider: Mina Masoudi
اساتید راهنما: Supervisors: Dr. Abbas Pak
اساتید مشاور: Advisory Professors: Dr. Hassan Elm Khah
اساتید ممتحن یا داور: Examining professors or referees:
زمان و تاریخ ارائه: Time and date of presentation: Year 2020
مکان ارائه: Place of presentation:
چکیده: Abstract: Nowadays, the role of nanostructured coatings in the development of technologies for application in various industries is considerable. A large percentage of industrial components are coated with ceramic, metal, and composite coatings to enhance their reliability and performance. Therefore, there are many efforts in this area to extend the service life of components in environments with poor operating conditions (including corrosive environment, high temperature oxidation and wear) by improving the coating properties of nano-coatings. The decrease in adhesion and quality of coating performance due to the high hardness and stress of most nanostructured coatings has led to the use of surface treatments before and after the process over the last decade along with the type of materials, structures and composition of coatings. Coatings to significantly improve coating properties. Meanwhile, the use of advanced manufacturing technologies such as the effects of ultrasonic surface treatment can be considered as a novel way to improve the properties of nanostructured coatings. Using ultrasonic peening, the material structure, surface roughness, mechanical properties, and residual stress levels near the surface can be changed. The results of this method can be considered as a novel surface treatment method and can be considered as a significant solution to improve the properties of nanostructured coatings including the adhesion and surface quality of coatings. the properties of CrN based nanostructured coatings. The purpose of this study was to investigate the effect of ultrasonic peening process on tool steel samples and to investigate the parameters of this process in improving the properties of CrN based nanostructured coating. The research is performed in four parts including ultrasonic peening equipment construction and surface treatment, CrN nanostructure coating by cathode arc evaporation on tool steel, in vitro evaluation of nanostructured coating properties and then analysis of results. According to the widespread use of nanostructured coatings in the automotive, airplane, oil and gas industries, medical equipment, construction, agriculture, textile, etc., the application of these results is wide-ranging. The results of this study will be useful in achieving desirable results of equipment manufacturing and service delivery. By applying ultrasonic peening operations in three ranges of amplitude 20, 25 and 30% and reviewing the results obtained from different experiments, it is possible to receive that ultrasonic peening operation by peening on the surface and plastic deformation, causing compressive residual stress on the surface of parts and The higher the amplitude of impact, the higher the compressive residual stress, so that in the sample with a amplitude of 30%, the residual stress has increased by 273%. Ultrasonic peening operation in low oscillation amplitudes has reduced the surface roughness by 38.8%, but with increasing oscillation amplitude, the roughness has increased. According to the results, it can be seen that the nanostructure coating and its low thickness did not have a significant effect on surface roughness. Surface treatment performed on the samples has caused severe deformation of the surface and the phenomenon of hardness and has increased the surface hardness by 123%. Also, with increasing oscillation amplitude in ultrasonic peening operations, the subsurface hardness increased but the depth of hardness changes remained almost constant. With increasing the hardness of the substrate by the ultrasonic peening process, the hardness of the nanocoat has also increased by 70%. According to the results of the adhesion test, the adhesion quality of the nano-coating to the substrate of the peened sample with an amplitude of 20% is optimal due to the compressive residual stress created by the ultrasonic peening operation and the improvement of the surface roughness. Other advantages of ultrasonic peening are the improvement of abrasion resistance and the relative reduction of the coefficient of friction by approximately 60% due to the increase in hardness, adhesion and reduction of surface roughness. This process also improves the corrosion behavior of the samples and the peened sample with an amplitude of 20% has optimal conditions and its corrosion resistance has improved by 32%. Key Words: Surface treatment, Ultrasonic peening, Coating, Cathodic vapor deposition, Nanostructured coatings
به اطلاع متقاضیان دکترای سال تحصیلی 1404-1403 رشته های مهندسی (مکانیک - کامپیوتر - برق - مواد - عمران - صنایع) دانشگاه بوعلی سینا می رساند، فهرست اساتید پذیرنده دانشکده مهندسی...
به اطلاع می رساند یک شرکت دانش بنیان در اصفهان نیازمند خدمات تحقیقاتی دانش آموختگان رشته های مواد و شیمی بوده و استخدام می کند. علاقمندان جهت کسب اطلاعات بیشتر و هماهنگی با شماره 03133879868 در...
به گزارش بسنا، مراسم افتتاحیه این پروژه با حضور محمدعلی زلفیگل وزیر علوم، تحقیقات و فناوری و دکتر علیرضا قاسمیفرزاد استاندار همدان، معاونان وزارتخانههای علوم و مسئولان استانی و ریاست...
دفتر هدایت استعدادهای درخشان دانشگاه بوعلیسینا فهرست اسامی دانشجویان برگزیده آموزشی پژوهشی پانزدهمین همایش سالانه دفتر هدایت استعدادهای درخشان سال ۱۴۰۲ را منتشر کرد. اسامی دانشجویان...
بهراد توتونچی دبیر انجمن علمی دانشجویی مهندسی عمران دانشگاه بوعلی سینا، در جلسه ای با حضور نمایندگان دانشگاه های سراسر کشور، با کسب اکثریت آرا انتخابات، به عنوان دبیر...
در هشتمین نشست از دوره یازدهم هیأت ممیزه دانشگاه بوعلیسینا، آقای دکتر علیرضا حاتمی دارای مدرک دکتری در رشته مهندسی برق با ر أ ی اعضاء از مرتبه...
بدینوسیله انتخاب آقای دکتر آرش فتاح الحسینی را به عنوان پژوهشگر برگزیده دانشگاه در گروه فنی و مهندسی به ایشان و خانواده علمی دانشکده مهندسی تبریک عرض نموده و از خداوند متعال...
بدینوسیله انتخاب دو تن از دانشجویان دانشکده مهندسی مهندس راضیه چهارمحالی در مقطع دکتری رشته مهندسی مواد شاخه خوردگی و مهندسی سطح و مهندس امین نظری در مقطع...
بدینوسیله انتخاب سه عضو هیات علمی دانشکده مهندسی جناب آقایان دکتر جواد بهنامیان ، دکتر حسن علم خواه و دکتر محسن گودرزی در...
براساس اطلاعات پایگاه شاخصهای اساسی علم (ESI)، حضوردکتر محمد حسن مرادی از گروه مهندسی برق دانشکده مهندسی در زمره پژوهشگران پراستناد یک درصد برتر دنیا استمرار پیدا کرد. ...
بدینوسیله انتخاب اعضا محترم هیات علمی سرکار خانم دکتر سموئی (گروه مهندسی صنایع)، جناب آقایان دکتر بابائی (گروه مهندسی عمران)، دکتر حاتمی (گروه مهندسی برق)، دکتر ختن لو (گروه مهندسی...
بدینوسیله انتخاب چهار عضو هیات علمی دانشکده مهندسی جناب آقای دکتر جواد بهنامیان از گروه مهندسی صنایع به عنوان پژوهشگر اول برگزیده، جناب آقای دکتر حسن علم خواه از گروه...
به گزارش بسنا و به نقل از سازمان سنجش، آزمون مرحله نهایی بیست و هشتمین دوره المپیاد علمی دانشجویی کشور با حضور نفرات برگزیده آزمون کارشناسی ارشد (متمرکز) و آزمون غیرمتمرکز المپیاد در دانشگاههای...
به اطلاع دانشجویان محترم می رساند سایت کامپیوتر کارشناسی دانشکده مهندسی به دلیل انجام ثبت نام دانشجویان کارشناسی ورودی 1402 از شنبه 1402/7/22 به مدت یک هفته تعطیل می باشد.
به گزارش بسنا و به نقل از معاونت علمی فناوری ریاست جمهوری، در هشتمین دوره تجلیل از سرآمدان علمی کشور در سال ۱۴۰۲ که با حضور معاون علمی و فناوری و اقتصاد دانشبنیان رئیسجمهور و وزیر علوم...
به اطلاع دانشجویان ورودی جدید تحصیلات تکمیلی (ارشد و دکترا) می رساند، یکشنبه 23 مهر ساعت 11 الی 13 در محل آمفی تئاتر دانشکده مهندسی جلسه معارفه با هیات رییسه دانشکده برگزار می شود. ...
بر اساس اطلاعات جدید نمایه استنادی معتبر scopus ۲۰۲۳، با بررسی مقالات مربوط به ۲۰۲۲، 4 عضو هیات علمی و 1 دانش آموخته دانشکده مهندسی و با بررسی کل مقالات مربوط به سال های مختلف، 1 نفر از اعضای هیات...
نظر به مراتب تعهد، تخصص و تجارب ارزشمند جناب آقای دکتر حسن علم خواه و بنا به پیشنهاد رئیس دانشکده مهندسی، به موجب ابلاغی ایشان با حفظ سمت آموزشی به مدت 2 سال به عنوان...
در حکمی از طرف ریاست دانشگاه آقای دکتر امیرسامان خیرخواه به عنوان مدیر گروه رشته مهندسی صنایع منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب...
در حکمی از طرف ریاست دانشگاه آقای دکتر صالح رازینی به عنوان مدیر گروه رشته مهندسی برق منصوب گردید. در این حکم آمده است : « با احترام و آرزوی توفیق الهی، نظر به مراتب تعهد و تجارب ارزنده...